First, find the picture on the internet what you want to do.
Print it out and dimension as shown in Figure is made.
Draw the graph paper scale all the dimensions Bigger%. As the right is made.

Make the frame as the house

Ceilings and walls, as shown in Fig. The walls and ceiling plate on top of which you can make a shingled roof
Stroller is easy to do calipers

The screen is easy to draw on paper surfaces. Glue a small drop of glue wheel Wednesday at the center of the paper and put the surfaces.

Draw a picture first, even if the piece of paper and balsa wood.

Start making from the center out, leaving a slightly oversize for the finalization of which is made sandpaper.

The ship is more difficult but can be found online at floor plans if you do not. Ship to tarvii more images, side, top, front and rear
Draw the bottom parts of the first graph paper and draw a hard drive or balsa wood as shown in FIGS.

Assemble the parts with superglue, watching it all comes directly.

The bottom is made of narrow balsa wood sheets, I myself have been using 0.8 thick, too, must first be put in water to soften for about 15 minutes that will bend enough
Wipe the excess water out of the first
Laitta cones are easy to express in place with an adhesive., As shown in Fig.

Sails must also be sized images first, and draw the graph paper so will directly ..
When you draw an image on canvas paper, always leave the sewing assets of approximately 8-10 mils which is the angle
I think twice in all the corners using an iron and sew.
They can put the rod nyörittämällä or grommets as shown on the right.

Here is the cartoon cats, these is your imagination with.